Skip to main content

Suction Blasting Cabinet



Suction Blasting is based on Injection principle of blasting. It works on the venture principle to get abrasive from a non-pressurized storage hopper to the blast gun where it is mixed with the compressed air stream and propelled against the work surface or blasting surface. Suction blast machines are most easily recognized by having two hoses (one for air and one for abrasive media) running to the blast gun.



When we are working with the suction-blast gun, it is easy to recognize, because it has two pipes attached to it, one providing compressed air and one vacuum pipe (abrasive blasting hose) is bringing media into the gun. Pressure-blast nozzles only have one larger pipe to deliver a mixture of media particles and compressed air.

The suction blasting cabinet system uses the venture principle, integrating an air jet one half the inside diameter of the nozzle. it creates a negative pressure in the pipe that sucks the abrasive media into the gun body from the media containing hopper. A suction blaster is operated continuously without shutdowns to refill abrasive media in the storage hopper and can be easily operated with multiple guns over multiple bodies.

Suction blast cabinets provide the ideal cleaning, smoothing and finishing solution to many coating, painting and corrosion problems. it is ideally used for ensuring a decorative or naturally pleasing surface finish across many materials. Suction systems generally have lower capital cost than a pressure cabinet and use less compressed air, making them appropriate for smaller workshops or lower production environments.



Suction blasting cabinet features are as follows:
  • Suction blasting cabinets are of lower cost than the similar-sized pressure blasting cabinets.
  • Suction blaster has far fewer moving parts and valves than a pressure abrasive blast unit, therefore, more easy maintenance and troubleshooting is possible there.

  • Less air and abrasive consumption is there in suction abrasive blast gun as its air demand is governed by the abrasive air jet, which is almost half the size the same as the blast nozzle diameter.
  • Continuous blasting is possible in a suction blasting cabinet because we didn't need to think to refill the abrasive media containing hopper again and again in this, whereas in a pressure blast system the continuous blasting timing is decided by the amount of abrasive media present in the storage hopper or pot present at one time.

Comments

  1. Rohan BhansaliJanuary 13, 2020 at 1:58 AM

    Hi, this is great topic about the Suction Blasting Machine. We are Manufacturer, Supplier, Exporter of Sandblasting Machine, Shot Blasting Machine, Small Grit Sand Blasting Machine Manufacturer, Mini Grit Sandblasting Machine Price.
    Learn more:Pressure Blasting Cabinet

    ReplyDelete
  2. Digvijay singhJanuary 13, 2020 at 2:39 AM

    Hello, it seems informative to me. Airo Shot Blast- Shot Blasting Machine Manufacturers, portable shot blasting machine price, Sand Blasting Machine for sale, Mini Grit Sandblasting Machine, Tumblast, Small Hanger type machine in Faridabad, Delhi, Pune, Chennai, Mumbai, INDIA.
    For Query:Suction Blasting Cabinet

    ReplyDelete
  3. manishJanuary 15, 2020 at 1:35 AM

    Great to see blogs like this . As we are Manufacturers, Suppliers, Exporter of various machine like Shot Blasting Machine Manufacturers, portable shot blasting machine price, Sand blasting machine for sale, mini grit sandblasting machine, tumblast, small hanger type machine.
    Read More:Wet Blasting Cabinet

    ReplyDelete
  4. Airoshot BlastDecember 5, 2020 at 2:06 AM

    Nice Blog!!!
    Here we are Manufacturers of Shot blasting machine in india.we provide all type of sand blasting machine, shot blasting machine & Grit blasting machine.
    See More:-
    Table Type Shot Blasting Machine
    Portable Shot Blasting Machine

    ReplyDelete

Post a Comment

Popular posts from this blog

sand blasting equipment Manufacture Company in jodhpur

                                        Blast room system        Blast room system Customized blast rooms are the spanking suspension for long workpieces. Blasting in a whole chamber system is to keep the method quality, security matters, and cost-Quality. A coordinated recognition system reaches a maximum of recyclable abrasive media, which involves the greatest cost advantage.  During a weight blast system, the abrasive is put in the pressure steamship then sealed. The craft is controlled to identical pressure because the blast hose attached to very inexpensive of the pressure container. The abrasive is metered into the blast pipe and conveyed by the charge through the blast nozzle. Types: Blast Room Enclosure Can Be Two Types: Modular (Metallic) Construction: The modular blast room is a fully sealed, dust-tied, all-steel construction, viable to be made...
4 comments
Read more

Shot Blasting Booth manufacturer,supplier & Exporter in India at low price.

Shot Blasting Rooms and Blasting Booths We are  Manufacturer of Sand/Shot and Abrasive Blasting room and booths. We design and supply customized grit blasting room with dust collectors and Exports low cost and best quality shot blasting booths. Blasting rooms and blasting booths are designed to contain the abrasive blasting process used with large workpieces. They are self-contained enclosures that have internal lighting and can accommodate both the workpiece and the operator. Often, the operator holds the blasting nozzle on the end of a lance. The blasted workpiece or part rests upon open-grid flooring that allows used abrasives to drop through for recycling. Shot Blasting Rooms and Blasting Booth Specifications Product specifications for blasting rooms and blasting booths include length, width and height. Workpiece loading is also important to consider. Choices include offhand or handheld, conveyor (belt, roller, or overhead monorail), table (gantry or rotary), tu...
4 comments
Read more

Shot Blasting Cabinet manufacturer, supplier & Exporter in Jodhpur, India.

Shot Blasting Cabinet We are manufacturers of Shot Blasting Cabinet such as suction Blasting Cabinet (SB), Wet Blasting Cabinet(WB) and Pressure Blasting Cabinet(PB). The better quality machines are widely applied for varied uses in the construction, agricultural and other industrial applications for surface cleaning of concrete and metal surfaces efficiently. shot blasting cabinet is another type of shot blasting  machine  which has a cabinet and is a closed form of the machine. In that closed part blasting of contaminants as well as recycling of shot blasting grit takes place. There are many other functions which are included like cleaning, recycling as well as the collection of dust particles too. In this shot blast cabinet, there is a window from where the operator can see what is going on in the process; there is an opening door from where the blasting material or blasting surface is kept inside the cabinet. There are three types of shot blast c...
7 comments
Read more